Organic Gardener's Composting by Steve Solomon

Composters use several strategies to maintain airflow. The most basic one is to blend an assortment of components so that coarse, stiff materials maintain a loose texture while soft, flexible stuff tends to partially fill in the spaces. However, even if the heap starts out fluffy enough to permit adequate airflow, as the materials decompose they soften and tend to slump together into an airless mass.

Periodically turning the pile, tearing it apart with a fork and restacking it, will reestablish a looser texture and temporarily recharge the pore spaces with fresh air. Since the outer surfaces of a compost pile do not get hot, tend to completely dry out, and fail to decompose, turning the pile also rotates the unrotted skin to the core and then insulates it with more-decomposed material taken from the center of the original pile. A heap that has cooled because it has gone anaerobic can be quickly remedied by turning.

Piles can also be constructed with a base layer of fine sticks, smaller tree prunings, and dry brushy material. This porous base tends to enhance the inflow of air from beneath the pile. One powerful aeration technique is to build the pile atop a low platform made of slats or strong hardware cloth.

Larger piles can have air channels built into them much as light wells and courtyards illuminate inner rooms of tall buildings. As the pile is being constructed, vertical heavy wooden fence posts, 4 x 4's, or large-diameter plastic pipes with numerous quarter-inch holes drilled in them are spaced every three or four feet. Once the pile has been formed and begins to heat, the wooden posts are wiggled around and then lifted out, making a slightly conical airway from top to bottom. Perforated plastic vent pipes can be left in the heap. With the help of these airways, no part of the pile is more than a couple of feet from oxygen