Organic Gardener's Composting by Steve Solomon

With the exception of the "tumbler," commercially made compost bins are derived from one of these two systems. Usually the factory-made wire bins are formed into rectangles instead of circles and may be made of PVC coated steel instead of galvanized wire. I see no advantage in buying a wire bin over making one, other than supporting unnecessary stages of manufacture and distribution by spending more money. Turkey wire fencing is relatively inexpensive and easy enough to find at farm supply and fencing stores. The last time I purchased any it was sold by the lineal foot much as hardware cloth is dispensed at hardware and building supply stores.

Manufactured solid-sided bins are usually constructed of sheet steel or recycled plastic. In cool climates there is an advantage to tightly constructed plastic walls that retain heat and facilitate decomposition of smaller thermal masses. Precise construction also prevents access by larger vermin and pets. Mice, on the other hand, are capable of squeezing through amazingly small openings. Promotional materials make composting in pre-manufactured bins seem easy, self-righteously ecological, and effortless. However, there are drawbacks.

It is not possible to readily turn the materials once they've been placed into most composters of this type unless the entire front is removable. Instead, new materials are continuously placed on top while an opening at the bottom permits the gardener to scrape out finished compost in small quantities. Because no turning is involved, this method is called "passive" composting. But to work well, the ingredients must not be too coarse and must be well mixed before loading.

Continuous bin composters generally work fast enough when processing_ mixtures _of readily decomposable materials like kitchen garbage, weeds, grass clippings and some leaves. But if the load contains too much fine grass or other gooey stuff and goes anaerobic, a special compost aerator must be used to loose