Wood Turning Logo for aroundthewoods.com woodturning tips, techniques and instructions

Apple Wood Hollow Form: Advanced Woodturning Project - Page(8)

The exterior of the piece is sanded to 2000 grit and a finish is applied while still on the lathe

make more of the bottom available to the sander

So I removed more of the attachment to the faceplate, being careful of the screws, so as to make more of the bottom available to the sander.

whole piece was sanded

Then the whole piece was sanded

sanded to 2000 grit

to 2000

a finish was applied

and a finish was applied

the bottom line I could now access

right to the bottom line I could now access.

began to part in on the tenon

I began to part in on the tenon to remove the piece from the lathe.