Cleaning the Workshop - Page 46
Just going through the drawers
| On the left a nut sitting on a washer and on the right a nut welded to a washer and three holes drilled in it. = a faceplate. They work well. |
|
| All sorts of sanding stuff from a drawer. The disks are 1" which I seldom use but when needed are handy. 5" sanding disks cut in quarters fit them well . |
|
| So back in the drawer. Or in some cases into the trash. |
|
| These drawers fit beneath the shelf. I got them at a dollar store under the belief that there is no sense having unused storage space. |
|
| These got saved. The yellow wheel was a part for tightening the tail center on the lathe. I replaced it with a nut. The belts are drive belts for the Craftsman. |
|
| A box labelled pen blanks which now holds some sticks of cocobolo wood found on the shelves across the shop. Seems to me I recollect buying these on sale from a hardwood dealer. Likely offcuts. |
|
Leave comments if you like at Round Opinions.
© 2015 copyright Darrell Feltmate, Around the Woods