|A donut jig for turning bowl bottoms. Different sized rings can be used to hold a bowl against the flat surface using bolts and nuts.
|It is attached to the lathe with a dedicated faceplate, in this case a wooden one.
|A couple more planer blades turned up. Much smaller. The upper one is marked for grinding into a scraper.
|A box of jigs, mostly v-blocks, for the bandsaw and drill press was quickly separated from scrap wood for the kindling box.
|I decided to attach one of the tool racks found back in the beginning of the exercise to the end of the big lathe bench.
|It does a nice job of holding the arm brace cutters and scrapers for hollowing.
Leave comments if you like at Round Opinions.
© 2015 copyright Darrell Feltmate, Around the Woods