|The bottom shelf is removed and sweeping continues. Both power bars are temporarily removed for cleaning.|
|Tools are hanging behind the bench on a very warped tool rack, a piece of strand board with holes drilled into it and some hangers to hold it. Do not use strand board for a tool rack for obvious reasons. The tools are sorted and the ones I use remain.|
|After the bottom shelf and the bottom of the tool well are replaced, the power bars and rehung and the bench put back in place. The top is really as warped as it looks. The bench needs major repairs and perhaps a new top.|
|I like power bars and have them on a lot of benches and cabinets. They each have their own circuit breaker for safety.|
|Sorry about the dark picture. This power bar had 7 outlets and has 3 in particular separated far enough for easy use of transformers|
|A box of "C" clamps was found beside the workbench. A local dollar store had them on sale for a couple of dollars each. These were a real bargain so I got a bunch they have not had them since. Maybe a remainder sale or something similar. These will join the other clamps on the router table for now.|
Leave comments if you like at Round Opinions.
© 2015 copyright Darrell Feltmate, Around the Woods